Table of Contents
Advertisement
68012006035-FA
Chapter 3 : Radio Overview
Function
Monitor
Multiple Private Line (MPL)
Nuisance Delete
One Touch 1–16
Phone
Priority Channel PTT
Priority Dispatch
Public Address (PA)
Radio Profiles
Radio Swap
Recent Calls
Rekey Request
Relay Pattern
Remote Emergency
Repeater Access Button
(RAB) (Conventional Only)
Reprogram Request (Trunking
Only)
Request-To-Talk (RTT) (Con-
ventional Only)
Scan
Secure Transmission Select
28
Description
Mode Select menus, press and hold the preferred Mode Select
menu.
Allows you to hear most or even all carrier activity on the current
channel of the radio.
Allows you to access to a listing of the available MPL Lists.
Temporarily removes the channel from the current Active Scan
when it continually generates unwanted carrier noise.
Launches a specific feature with one single button-press.
Initiate Phone Mode while operating in Conventional or Trunking
communications mode.
If your radio is operating in Scan Mode, and a Priority Member 1
Scan List Member is available in the Scan List of the current
channel, pressing this button can cause the radio to key up
on the Priority 1 Scan List Member channel. This operation al-
lows transmission of voice communications. Otherwise, the radio
blocks the transmission and plays the Talk Prohibit Tone.
Allows you to call the dispatcher on a different talkgroup.
Allows you to activate and deactivate the PA system, which
routes microphone audio through an external speaker system.
Allows you to select one of the programmed Radio Profiles.
To switch back and forth between two radios that are attached to
the same control head in a Dual Radio configuration, press the
button.
To allow the programmed Radio Alias of the selected radio to
temporarily appear in the control head display, press and hold
the button.
Allows you to view the recent call history of your radio.
Notifies the dispatcher that a new encryption key is needed.
Allows you to activate and deactivate a Relay Lightbar Pattern.
Activates the Remote Emergency feature for an authorized user
to initiate the Emergency feature on a target radio without target
user intervention.
Allows you to manually send a repeater access codeword.
Notifies the dispatcher that a new dynamic regrouping assign-
ment is needed.
Notifies the dispatcher that you want to send a voice call.
To turn on or off the scan function, press the button.
To enable or edit the Scan List Programming, press and hold the
button.
Allows you to securely toggle transmission on or off.
Advertisement
Table of Contents
