Table of Contents
Advertisement
Option
Switching between Normal or Invert DPL
Operation
Editing Tx NAC or Rx NAC
Switching among Rx Analog, Mixed, and
Digital Mode
Switching between Tx Analog and Digital
Mode
Switching among Narrow, Medium, and
Wide Bandwidth
Chapter 33 : Front Panel Programming
Actions
b To modify the TX DPL or Rx DPL code of
the selected channel, press EDIT.
c Enter the required value.
a To switch between normal and invert
DPL modes, press INVT.
a To find Tx NAC or Rx NAC, press the
Left or Right navigation button.
b To modify the TX NAC or Rx NAC of the
selected channel, press EDIT.
c Perform one of the following actions
when entering the required value:
•
To scroll through A, B, C, 2, multiple
press 2.
•
To scroll through D, E, F, 3, multiple
press 3.
•
To enter the digits, press 0, 1, 4–9.
a To find Rx Type, press the Left or Right
navigation button.
b Press EDIT.
c Select ANALOG, MIXED, or DIGITAL by
pressing the Up or Down navigation but-
ton.
a To find Rx Type, press the Left or Right
navigation button.
b To change the Rx mode of operation of
the selected channel, press EDIT.
c To switch to MIXED, press the Up or
Down navigation button.
d Press the Tx Type menu item.
e To change the Tx mode of operation of
the selected channel, press EDIT.
f
To switch between ANALOG and DIGI-
TAL modes, press the Up or Down navi-
gation button.
a To find Bandwidth, press the Left or
Right navigation button.
b To change the bandwidth of the selected
channel, press EDIT.
c To switch between 12.5 kHz, 20.0 kHz,
and 25.0 kHz, press the Up or Down
navigation button.
68012006035-FA
117
Advertisement
Table of Contents
