Pairing The Authentication Pin When Receiving A Pairing Request; Pairing The Authentication Pin With The Generated Numeric Pin - Motorola APX 1500 User Manual

68012006035-FA
Chapter 14 : Connectivity
14.3.3.1

Pairing the Authentication PIN when Receiving a Pairing Request

Procedure:
1 When the display shows a pair request, press Ok.
Your radio only supports HSP, DUN, GAP, PAN, and SPP Bluetooth profiles.
The display shows Compare PIN: XXXXXX.
2 Press Ok if the pin is correct.
Scenario
If pairing is successful,
If pairing is unsuccessful when the pairing
timer expires,
If pairing is unsuccessful when the connect-
ing timer expires,
If the PIN is correct but the profiles are not
supported,
NOTE:
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
14.3.3.2

Pairing the Authentication PIN with the Generated Numeric PIN

Prerequisites: Follow the procedure in
for available Bluetooth devices.
Procedure:
1 To initiate pairing, select the required device and press Sel.
Your radio only supports HSP, DUN, GAP, PAN, and SPP Bluetooth profiles.
If successful, the display shows Pairing in progress... followed by a randomly
generated numeric PIN, Compare PIN: XXXXXX.
If unsuccessful, the display shows BT profiles not supported and returns to the
Available Dev screen.
2 To continue pairing your radio and the device, press Ok.
78
Outcome
your radio displays Pairing in pro-
gress...., <Device Friendly Name>
paired followed by <Device Friendly
Name> connected.
your radio displays <Device Friendly
Name> pair failed.
your radio displays <Device Friendly
Name> connect failed.
your radio displays BT profiles not
supported and returns to Home screen.
Searching and Pairing Bluetooth Devices on page 77 to search