Table of Contents
Advertisement
•
To reset when the display shows Update done Please reset upon completion, press
the Power button.
•
To reset when the display shows Update failed Please reset when it fails to update,
press the Power button.
If the updates are incomplete, the radio enters the Maintenance Mode. The display shows
Maintenance Mode Remote Device and other maintenance statuses.
NOTE: If SW incomplete appears, use Flashport Recovery Tool to update the control heads
before you turn on the radio again.
4.3
Adjusting the Volume
Procedure:
1 Perform one of the following actions:
•
To increase the volume, rotate the Multi-Function Knob clockwise.
•
To decrease the volume, rotate the Multi-Function Knob counterclockwise.
NOTE: Depending on your radio configuration, the tone plays the current volume or the
tone is disabled.
68012006035-FA
Chapter 4 : Getting Started
33
Advertisement
Table of Contents
