Table of Contents
Advertisement
68012006035-FA
Chapter 32 : Dynamic Zone Programming
Chapter 32
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be programmed for you to use this feature. At least one zone in the
radio must be a nondynamic zone.
32.1
Saving Channels in the Dynamic Zone
Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
The radio returns to the Home screen and displays the selected Dynamic Zone Channel.
2 Press the ZnPr menu item.
3 Press Edit.
4 Select List Selection and press Sel.
5 Select the required zone and press Sel.
6 Select the required channel and press Sel.
7 To return to the Home screen, press Exit.
32.2
Deleting Channels in the Dynamic Zone
Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
The radio returns to the Home screen and displays the selected Dynamic Zone Channel.
2 Press the ZnPr menu item.
3 Select the required saved dynamic channel and press Del.
4 To return to the Home screen, press Exit.
The Home screen shows <Dynamic Zone Channels>. If the deleted channel is the home channel,
the Home screen shows <Zone Name>"Blank".
114
Advertisement
Table of Contents
