radios during Mission Critical operations. Other Bluetooth devices may or may not meet the mission critical
standard.
Your radio supports the following Bluetooth enabled devices or profiles:
●
Headset (HSP)
●
Dial Up Networking (DUN)
●
Personal Area Networking (PAN)
●
Serial Port (SPP)
●
General Attribute Profile (GATT)
7.21.1
PIN Authentication in Pairing
This feature allows your radio to verify the correct device to pair with using PIN authentication.
NOTE: The PIN authentication method is only applicable for Bluetooth version 2.1 and above.
7.21.1.1
Pairing the Authentication PIN when Receiving a Pairing
Request
Procedure:
1. When the radio display shows <Device Friendly Name> pair request, perform one of the
following actions:
●
To accept, press the Menu Select button below Ok.
●
To reject, press the Menu Select button below Cncl.
Your radio only supports HSP, DUN, PAN, and SPP Bluetooth profiles.
When the pairing timer expires, the display shows <Device Friendly Name> pair canceled
and return to Home screen.
If you choose to accept the pairing process, the display shows Compare PIN: XXXXXX.
If you choose to reject the pairing process, the display shows Cancel pairing in progress...
followed by <Device Friendly Name> pair canceled and return to Home screen.
2. Perform one of the following actions when the display shows Compare PIN: XXXXXX.:
●
Press the Menu Select button below Ok if the PIN is correct.
●
Press the Menu Select button below Cncl to reject if the PIN number is incorrect. The display
shows Cancel pairing in progress... followed by <Device Friendly Name> pair
canceled and return to Home screen.
When the PIN authentication timer expires, the display shows <Device Friendly Name>pair
canceled and return to Home screen.
If successful, the display shows Pairing in progress...., <Device Friendly Name>
paired followed by <Device Friendly Name>connected.
If unsuccessful, one of the following scenarios will occur:
MN004863A01-AN
Chapter 7: Advanced Features
93