Setting ATW-T3201 / ATW-T3201a / ATW-T3202 / ATW-T3202a
List of setting items
FREQUENCY
MANUAL
Gr/Ch
NAME
GAIN
RF POWER
HPF
LOCK
Fn BUTTON
MUTE MODE (ATW-T3201 /
ATW-T3201a only)
UTILITIES
BATTERY
LED
ACCESS
RESET
VERSION
Setting the transmission frequency
Setting manually
1.
From the menu screen, press the UP/DOWN button to select
[FREQUENCY], and then press the SET button.
FREQUENCY
000
2.
After selecting [MANUAL], press the SET button.
FREQUENCY
3.
Press the UP/DOWN button to set the first 3 digits. After
completing the setting, press the SET button.
4.
Press the UP/DOWN button to set the last 3 digits. After
completing the setting, press the SET button.
• The setting is complete.
Set the transmission frequency.
Set the channel name.
Set the gain.
Set the transmission output.
Set HPF (High-Pass Filter).
Set a lock.
Set the function allocation for function
button.
Set the mute mode.
Set the type of batteries used.
Set whether to constantly keep
indicator turned on or off.
Set the user access level.
This returns the transmitter settings to
their factory defaults.
It shows the version of the transmitter.
.000
MHz
MANUAL
Setting by group/channel
1.
From the menu screen, press the UP/DOWN button to select
[FREQUENCY], and then press the SET button.
FREQUENCY
000
2.
After selecting [Gr/Ch], press the SET button.
FREQUENCY
3.
Press the UP/DOWN button to set the group. After completing
the setting, press the SET button.
4.
Press the UP/DOWN button to set the channel. After completing
the setting, press the SET button.
• The setting is complete.
Setting the channel (transmitter) name
The following characters can be entered:
• The maximum number of characters that can be entered is 8.
Alphabetic (Uppercase
letters)
Symbols (+, −, #, &, period)
1.
From the menu screen, press the UP/DOWN button to select
[NAME], and then press the SET button.
NAME
2.
Press the UP/DOWN to select a desired character and press the
SET button.
• The character is input and the cursor moves.
3.
Repeat the operation in Step 2 to enter all characters.
• If you don't enter 8 characters, press the UP/DOWN button and select
[End] and then press the SET button.
4.
After entering the 8th character, press the SET button.
• [End] is displayed.
5.
Press the SET button.
• The setting is complete.
20
.000
MHz
Gr/Ch
Numeric
Space