Wheel Changing - Jeep AVENGER 2023 Owner's Handbook Manual

IMPORTANT
117) Jeep accepts no responsibility for
the cost incurred in repairing the vehicle
or for rectifying malfunctions resulting
from the installation of accessories not
supplied or not recommended by Jeep
and not installed in accordance with its
recommendations, in particular when the
combined power consumption of all of the
additional equipment connected exceeds
10 milliamperes.

WHEEL CHANGING

(where the spare wheel is provided)
271) 272) 273) 274) 275) 276) 277) 278)
198
TOOLS
(where provided)
Vehicles with spare wheel
269
Open the load compartment.
The tools fig. 269 are located either
in the toolbag on the carpet or in the
toolbox under the carpet:
Jack (1)
Wheel wrench (2)
Towing eye (3)
(4): not available
Chock (where provided) (5)
Adapter for the locking wheel nuts (6)
(where provided)
Screwdriver (7)
Torx T30 screwdriver (where provided)
(8)
Hex wrench (where provided) (9)
WARNING These tools are specific to the
vehicle and may vary according to the
level of equipment. Do not use them for
any other purpose.
270
To use the chock, fold apart and stick
together (see fig. 270).
Spare wheel
(for versions/markets where provided)
JJ000725
The spare wheel can be classified as a
temporary spare wheel depending on the
size compared to the other mounted
wheels and country regulations. In this
case a permissible maximum speed
applies, even though no label at the
spare wheel indicates this.
Only mount one temporary spare wheel.
Do not drive faster than 80 km/h. Take
curves slowly. Do not use for a long
period of time.
JJ000569