Charging Procedure; From Wallbox Charging; Station - Jeep AVENGER 2023 Owner's Handbook Manual

port fig. 245 within 30 seconds after
unlocking.
The end of charging is confirmed when
the green CHARGE indicator lamp on
the control unit comes on fixed and the
green light next to the charging port
come on fixed.
After disconnection, replace the
protective cover over the connector and
close the charging flap.
Disconnect the control unit's charging
cable from the domestic socket.
WARNING
244) After the end of the charging
progress: disconnect the charging cable
from the charging port of the vehicle;
make sure the charging port flap is
closed; always disconnect the charging
cable from the domestic electrical outlet;
avoid any entry of fluids into the charging
port of the vehicle, the vehicle plug of
the charging cable and the domestic
electrical outlet.

CHARGING PROCEDURE

FROM WALLBOX
CHARGING STATION
Shift the PRND command into P and
switch off the vehicle
engage the electric parking brake
take the charging kit located in the
boot
push the charging port flap on the
mark fig. 246 to release it
246
remove any dust that may have
accumulated on the charging connector
and charging port
follow the accelerated charging unit
(Wallbox) user instructions
remove the protective cover (1)
fig. 247
247
grasp the charging connector by
the handle (1) fig. 253, remove the
protective cover and insert the connector
into the charging port fig. 248 until you
hear the click indicating that it has been
locked
JJ000469
248
The start of charging is confirmed by the
flashing of the green light next to the
charging port.
If this is not the case, charging has not
started; restart the procedure ensuring
that all connections are properly
established.
JJ000675
JJ000470
177