Speed Limit Recognition - Jeep AVENGER 2023 Owner's Handbook Manual

Hide thumbs Also See for AVENGER 2023:
Table of Contents

Advertisement

load is correctly positioned, in order not
to cover the camera operating range.
79) If the windscreen glass must be
replaced due to scratches, chipping or
breakage, contact exclusively a Jeep
Dealership. Do not replace the windscreen
on your own, risk of malfunction! It is
advisable to replace the windscreen if it is
damaged in the area of the camera.
80) Do not tamper with nor operate on the
camera. Do not close the openings in the
aesthetic cover located under the interior
rear view mirror. In the event of a failure
of the camera, contact a Jeep Dealership.
81) Do not cover the operating range of
the camera with stickers or other objects.
Also pay attention to other objects on
the bonnet (e.g. a layer of snow) and
make sure they do not interfere with the
camera.
152
SPEED LIMIT
RECOGNITION
(where provided)
204) 205) 206)
82) 83) 84) 85) 86) 87) 88) 89)
WARNING For more information, refer to
the "Advanced Driver Assistance Systems
(ADAS) recommendations" chapter in
this section and "System limitations" in
this chapter.
Depending on the vehicle features,
the Speed Limit Recognition uses the
camera at the top of the windscreen
(Traffic Sign Recognition) or the camera
combined with the navigation system of
Uconnect™ 10,25"/10,25" NAV.
TRAFFIC SIGN RECOGNITION
Using the camera at the top of the
windscreen, this system detects and
reads speed limit signs and end of speed
limit signs.
If the function is activated and set as a
widget in the Uconnect™ 10,25"/10,25"
NAV, up to two speed limit signs
including supplementary signs are
displayed in the instrument panel display
(1) fig. 196 (example for version 7").
196
If several speed limits are recognised,
the vehicle may analyse and display the
valid speed limit.
When a traffic sign for a certain area,
e.g. city or motorway, is recognised and
the vehicle is fitted with a navigation
system, the corresponding speed limit
will also be displayed.
If the system is activated but does not
detect a speed limit sign, the following
sign is displayed:
197
If a speed limit is detected and the
vehicle exceeds it for the first time
JJ000363
JJ000631

Advertisement

Table of Contents
loading

Table of Contents