Procedure For Charging From Adomestic Power Socket (Ac) - Jeep AVENGER 2023 Owner's Handbook Manual

"MODE 3" CHARGING CABLE
237
1. Vehicle plug
2. Plug for wall box / AC charging station
Mode 3 charging cables are used for
charging at wall boxes and AC charging
stations. A mode 3 charging cable
provides a vehicle plug and a plug for
the wall box / AC charging station. Wall
boxes / AC charging stations may provide
an integrated mode 3 charging cable.
For more information on the mode 3
charging cable, refer to the manual of
the charging cable manufacturer.
"MODE 4" CHARGING CABLE
(where provided)
WARNING Only use DC charging cables
shorter than 30 metres.
This can be used to charge from DC
(direct current) public charging sockets.
The charging cable is connected to the
charging station. The charging procedure
can be faster than with AC charging
stations.
PROCEDURE FOR
CHARGING FROM A
DOMESTIC POWER
SOCKET (AC)
CHARGING PROCEDURE
Shift the PRND command into P and
switch off the vehicle
engage the electric parking brake
take the charging kit located in the
boot
JJ000427
push the charging port flap on the
mark fig. 238 to release it
238
remove any dust that may have
accumulated on the charging connector
and charging port
remove the protective cover (1)
fig. 239
239
unroll the charging cable and connect
it from the control unit to the domestic
socket. When the connection is made, all
of the indicator lamps on the control unit
light up, then only the POWER indicator
lamp remains on in green
grasp the charging connector by
the handle (1) fig. 240, remove the
protective cover and insert the connector
into the charging port fig. 241 until you
hear the click indicating that it has been
locked
JJ000469
240
JJ000675
1
JJ000375
175