Speed Limiter - Jeep AVENGER 2023 Owner's Handbook Manual

SHORTCUTS FOR
ADVANCED DRIVER
ASSISTANCE SYSTEMS
Advanced Driver Assistance System
(ADAS) can be accessed directly to
quickly activate/deactivate them.
By default, driving aids are already
stored in the system (e.g. Stop-Start,
Lane Keeping Assist)
Other driving aids can be added or
deleted from the page.
It is configured in the
"ADAS">"Functions" touch screen
application.
press the button (1) fig. 179
179
press the button corresponding to
the Advanced Driver Assistance System
concerned:
full symbol: the function is added
to the shortcuts
empty symbol: the function is
deleted from the shortcuts
check the modification in the
"Shortcuts" tab.

SPEED LIMITER

(where provided)
178) 179) 180)
WARNING For more information, refer to
the "Advanced Driver Assistance Systems
(ADAS) recommendations" chapter in
this section.
The Speed limiter prevents the vehicle
from exceeding a preset maximum
speed.
The maximum speed can be set at
speeds above 30 km/h.
The driver can accelerate the vehicle up
to the preset speed. Deviations from the
limited speed may occur when driving
downhill.
The preset speed can be exceeded
temporarily by pressing the accelerator
pedal firmly.
The status and preset speed limit are
displayed in the instrument panel
display.
JJ000608
STEERING-MOUNTED
CONTROLS
OK
_
180
(1) Activate the speed limiter at the
previously saved speed setting. Use the
speed suggested by the Road signs
recognition
(2) Increase/Decrease the speed setting
(3) Switch on/pause the speed limiter at
the previously saved speed setting
(4) Speed limiter ON/OFF
SWITCHING ON/PAUSING
press (4) fig. 180 to select the speed
limiter mode; the function is paused (the
speed shown on the instrument panel
display is grey).
if the limit speed setting is suitable
(most recent speed setting programmed
in the system), press (3) or (1) OK to
switch the speed limiter on (the speed is
green)
pressing (3) again temporarily pauses
the function
JJ000612
139