HAZARD WARNING
FLASHERS
263
Operated by pressing
When braking in an emergency, the
hazard warning flashers are switched on
automatically, depending on the force
of deceleration. They are switched off
automatically, as soon as the vehicle is
accelerated again.
190
WARNING TRIANGLE
(where provided)
This reflective and dismantable device
is to be installed on the side of the
road when a vehicle is broken down or
damaged.
255)
ASSEMBLING AND PLACING THE
TRIANGLE
JJ000516
fig. 263.
264
For versions supplied with a triangle as
original equipment, refer to fig. 264.
For other versions, refer to the assembly
instructions provided with the triangle.
Put the triangle in place behind the
vehicle, as required by local legislation.
255) Before getting out of the vehicle
Turn on the hazard warning lamps, then
put on the safety vest to assemble and
install the triangle
JJ000656
WARNING
EMERGENCY OR
ASSISTANCE CALL
265
(1) eCall (SOS)
(2) ASSISTANCE
eCall (SOS)
Your vehicle may be fitted with the eCall
(SOS) system either as standard or as an
option.
The eCall (SOS) system provides direct
contact to the emergency services and is
fully built into the vehicle. This contact
is made either automatically via the
sensors built into the vehicle, or by
pressing button (1) fig. 265.
According to the country of sale, the
eCall (SOS) system corresponds to the
systems PE112, ERAGLONASS, 999,
etc.
The eCall (SOS) system is activated by
default.
To make an emergency call manually,
press button (1) for more than 2
seconds.
JJ000518