Sony LMD-A240 Operating Instructions Manual page 37

Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Handle (1) (LMD-A220/A180 only)
Fixing screws for the handle (4) (LMD-
A220/A180 only)
Before Using This Unit (1)
European Representative (1)
Optional accessories
Mounting bracket
MB-L22 (For LMD-A220)
MB-L18 (For LMD-A180)
Protection kit
BKM-PL18 (For LMD-A180)
Design and specifications are subject to change without
notice.
Notes
Always verify that the unit is operating properly

before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
 SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE

TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
Available video signal formats
The unit is applicable to the following video signal
formats.
Com-
System
posite

575/50i (PAL)

1)
480/60i (NTSC)
576/50p –
1)
480/60p –
1)
640 × 480/60p –
1)
1080/24PsF –
1080/25PsF –
1)
1080/30PsF –
1)
1080/24p –
1080/25p –
1)
1080/30p –
1080/50i –
1)
1080/60i –
1080/50p –
1)
1080/60p –
1)
720/24p –
720/25p –
1)
720/30p –
720/50p –
1)
720/60p –
1)
2048/24PsF –
2048/25PsF –
1)
2048/30PsF –
1)
2048/24p –
2048/25p –
1)
2048/30p –
1)
2048/48p –
2048/50p –
1)
2048/60p –
 : Adjustable/can be set
– : Not adjustable/cannot be set
1) Compatible with 1/1.001 frame rates.
2) 10-bit 4:4:4 YCbCr and 4:4:4 RGB signals are supported.
3) 10-bit 4:2:2 YCbCr signal is supported.
4) Signal systems are displayed as 1080/25PsF, 30PsF on the screen if the
payload ID is added to the video signal, or displayed as 1080/50I, 60I
if the ID is not added.
5) Signal systems are displayed as 1080/50I, 60I on the screen regardless
of whether the payload ID is added to the video signal.
SD/ Dual
3G HDMI
HD Link
 
– –
 
– –

– – –

– – –

– – –
  
2) 2)
–
  
4) 2) 5) 2) 4)
–
  
4) 2) 5) 2) 4)
–
   
2) 2)
   
2) 2)
   
2) 2)
   
2) 2)
   
2) 2)
  
3) 3)
–
  
3) 3)
–

– – –

– – –

– – –
  
2)
–
  
2)
–
  
2) 2)
–
  
2) 2)
–
  
2) 2)
–
  
2) 2)
–
  
2) 2)
–
  
2) 2)
–
 
3) 3)
– –
 
3) 3)
– –
 
3) 3)
– –
Specifications
37