Sony LMD-A240 Operating Instructions Manual page 27

support OETF of S-Log3, S-Log2, ITU-R
BT.2100(HLG), or SMPTE ST 2084.
Even if the setting for [Gamma] is changed in the

[Color Temp/Color Space/Gamma] menu, the action
and display of the scale of [False Color] do not switch
automatically.
 For the color display for brightness, refer to the
product features of the LMD-A Series on the Sony
website.
[False Color Scale]
Press the button to display the scale of [False Color].
[Marker Setting]
Submenu Setting
[Marker] Selects [On] to display the marker and
[Off] not to display.
[Marker Preset] Sets the preset data for the marker.
Select the marker preset from [Marker
Preset1] to [Marker Preset5].
[Aspect Marker Sets the aspect marker.
Setting] [Aspect Marker]: Select [On] or

[Aspect Mode]: Sets the aspect ratio

[Blanking]: Sets the blanking outside

[Off].
of the aspect marker. You can
select [4:3], [16:9], [15:9], [14:9],
[13:9], [1.85:1], [2.39:1] or
[2.35:1].
the area of the aspect marker.
You can select [Off] or [Gray].
Submenu Setting
[Area Marker1 Sets the area marker.
Setting] [Area Marker1]: Select [On] or [Off].

([Area Marker2 [Area Marker1 Mode]: Sets the

1)
Setting] ) display mode of the area marker.
1) The set items are You can select [Safe Area
the same as for Marker] or [Flexible Area
[Area Marker1 Marker].
Setting]. When [Safe Area Marker] is selected

[85%], [88%], [90%], [93%] or
[95%].
When [Flexible Area Marker] is
selected

horizontal position of the
marker at the top left corner of
the image display area as the
starting point. You can select a
position from between [0] to
[2047].

position of the marker at the top
left corner of the image display
area as the starting point. You
can select a position from
between [0] to [1079].

marker. You can select a width
from between [1] to [2048].

marker. You can select a height
from between [1] to [1080].
[Thickness]: Sets the thickness of the

marker. You can select a
thickness from between [1dot]
to [5dots].
[Color]: Sets the color of the marker.

You can select [Red], [Green],
[Blue], [Yellow], [White], [Cyan]
or [Magenta].
[Center Marker [Center Marker]: Sets whether or not

Setting] to display the center marker
([On] or [Off]).
[Type]: Sets the display mode of the

center marker. You can select [1]
or [2].
[Intensity] Sets the luminance of [Aspect Marker],
[Area Marker1], [Area Marker2] and
[Center Marker]. You can select [High]
or [Low].
[Grid] Sets the grid display. Select [On] to
display the grid and [Off] not to display.
[Grid Type] Sets the grid type to be displayed.
[Full Screen]: Displays the grid over

the entire screen.
[Window]: Displays the grid except

for the center part of the screen.
[Grid Pitch] Sets the grid pitch to be displayed.
[60dots]: Sets the grid line interval to

60 dots.
[120dots]: Sets the grid line interval

to 120 dots.
[Area Size]: Select [80%],
[H Position]: Sets the
[V Position]: Sets the vertical
[Width]: Sets the width of the
[Height]: Sets the height of the
Adjustment Using the Menus
27