Sony LMD-A240 Operating Instructions Manual page 20

Submenu Setting
[Format Display] Selects the display mode of the signal
format.


[Screen Saver] Sets the screen saver function [On] or
[Off].


Note
When the screen saver is activated, the
Line Doubler function is turned off.
[Power Saving] Sets the power saving mode to [On] or
[Off]. When you set to [On], the
monitor goes into power saving mode if
no signal is input for about one minute.
While the unit is in power saving mode,
the currently-set input select button
flashes.
When a source name or tally
information is input, a front panel
button is pressed, or a parallel or serial
remote command is input, the unit exits
the power saving mode.
[Auto Power Down] When [On] is selected, if a no input-
signal state continues for 60 minutes,
the monitor is automatically turned off.
To cancel the settings, select [Off].
(Default value: [On])
20
Adjustment Using the Menus
[Auto]: The format and scan mode
are displayed for about five
seconds when the input of the
signal starts.
[Off]: The display is hidden.
[On]: If a still image is displayed for
more than 10 minutes, the
brightness of the screen is
automatically decreased to
reduce burn-in. The screen
returns to normal brightness
when you input a video signal to
the unit or operate the buttons
on the front panel of the unit.
While the screen saver is
activated, the LED of the
selected input select button
flashes (To decrease the
brightness of the LED, see [LED
Brightness] (page 19)).
[Off]: The screen saver function is
deactivated.
Submenu Setting
[Power On Setting] Sets this unit's setting status after the
unit is turned on. Select from [Last
Memory], [User Preset1], [User
Preset2], [User Preset3], [User Preset4],
[User Preset5] or [Factory Preset].
When [Factory Preset] is selected, the
unit returns to the factory default
setting except for the following:
Color temperature for [User1]

Color temperature for [User2]

User Preset for [User Preset1]

User Preset for [User Preset2]

User Preset for [User Preset3]

User Preset for [User Preset4]

User Preset for [User Preset5]

Password setting

Network setting

Language setting

[User Reset] Returns to the factory default setting
except for the following:
Color temperature for [User1]

Color temperature for [User2]

User Preset for [User Preset1]

Password setting

Network setting

Language setting

[Cancel]: Cancels the reset.

[Confirm]: Resets the unit. When the

[User Preset Setting]
Submenu Setting
[User Preset Status] You can confirm the setting status of the
User Presets. The status of the selected
User Preset number is displayed. By
turning the page, you can confirm the
status of [User Preset1], [User Preset2],
[User Preset3], [User Preset4], [User
Preset5] and [Default]. The displayed
items are the following:
[Color Temp]

[Color Space]

[Gamma]

[Brightness/Contrast]

[Chroma/Phase]

[Aperture/Volume]

[Backlight]

[Marker Preset]

reset finishes, this unit restarts.