Sony LMD-A240 Operating Instructions Manual page 25

480i, 575i, 480p, 576p
Displays the original
video signal pixels. If a
format other than 640 ×
480p is input, the screen
will not be displayed in
the appropriate aspect
ratio.
[Aspect]
Press the button to set the aspect ratio of the picture,
[16:9] or [4:3].
[2048 Shift]
Press the button to display the hidden left and right parts
exceeding the H size (1920) of the panel when the input
signal system is 2048 × 1080 in the native scan mode. To
slide images and display the hidden parts in the left and
right sides, turn the menu selection control.
The menu selection control can slide images
to display the hidden parts.
[Flip H]
[Flip V]
[Flip H/V]
Press the button to display the reversed image. [Flip H],
[Flip V] and [Flip H/V] can be assigned to each function
button.
LMD-A240
1080i, 1080PsF, 1080p
LMD-A220/A180
1080i, 1080PsF, 1080p
720p
Normal display
[Flip V]
Note
When the reverse function is enabled, the following
functions turn off.
 [Wipe]
[Side by Side]

[Blending]

[Difference]

 [Auto SDI Switch]
 [WFM/ALM/Vector]
 [Closed Caption]
[Time Code]

[Anamorphic]

[Brightness]
Press the button to display the adjustment screen and
adjust the picture brightness. Press again to hide the
adjustment screen. However, the picture brightness
remains adjustable. Turn the menu selection control
right to increase the brightness, or left to decrease it.
Note
The brightness-adjustment specification changes
according to the gamma setting (see page 18).
[Contrast]
Press the button to display the adjustment screen and
adjust the picture contrast. Press again to hide the
adjustment screen. However, the picture contrast
remains adjustable. Turn the menu selection control
right to increase the contrast, or left to decrease it.
Notes
The lower limit of the contrast value is 3.

One step of the contrast value from 81 to 100 increases

only when the gamma mode is set to [ITU-R
BT.2100(HLG)]. Selecting a value greater than 81
changes the contrast seven times more than selecting a
value less than 80 (default).
[Flip H]
[Flip H/V]
25
Adjustment Using the Menus