Sony LMD-A240 Operating Instructions Manual page 21

Professional video monitor
Table of Contents

Advertisement

Submenu
Setting
[Load]
Loads the saved settings in [User
Preset1], [User Preset2], [User Preset3],
[User Preset4], [User Preset5] and
[Default].
[Cancel]: Cancels loading.
[Confirm]: Loads the setting.
[Save]
Saves the current setting status to [User
Preset1], [User Preset2], [User Preset3],
[User Preset4] or [User Preset5].
[Cancel]: Cancels saving.
[Confirm]: Saves the setting.
Note
When the [Password Lock] is set to
[On], the [User Preset1] value is
protected by a password. When the
value is saved to [User Preset1], enter
the password.
[Input Setting]
Submenu
Setting
[Dual Link]
Sets the dual link. Select from [422
YCbCr], [444 RGB], [444 YCbCr] or
[Off].
Enter the link A signal of the SDI dual
link signal to the SDI IN  connector
and the link B signal of the SDI dual
link signal to the SDI IN  connector.
Notes
When [Dual Link] is set to a setting
other than [Off], both LEDs of the
SDI 1 and SDI 2 buttons on the front
panel are lit.
When [Dual Link] is set to a setting
other than [Off], the SDI (3G/HD/
SD) signal of the single link cannot
be displayed while the SDI 1 or SDI 2
button on the front panel is pressed.
To display the signal of the single
link, be sure to set [Dual Link] to
[Off].
[SDI RGB Range]
Sets the black level and white level for
the RGB format of SDI input.
[Limited]: [64] (black level) to [940]
[Full]: [0] (black level) to [1023]
(white level)
(white level)
Submenu
Setting
[DVI RGB Range]
Sets the black level and white level for
the RGB format of DVI input.
[Limited]: [16] (black level) to [235]
(white level)
[Full]: [0] (black level) to [255] (white
level)
[Anamorphic]
Set to confirm the content using the
anamorphic lens.
Depending on the magnification of the
lens or the aspect ratio of the imager,
you can select from the following:
[Off]
[2.0X_4:3]
[2.0X_16:9]
[2.0X_17:9]
[1.3X_4:3]
[1.3X_16:9]
[1.3X_17:9]
[2.0X_4:3]
Note
When [Anamorphic] is set to a setting
other than [Off], the following
functions cannot be used:
[Side by Side]
[Wipe]
[Blending]
[Difference]
[Line Doubler]
[Auto SDI Switch]
[Time Code]
[Closed Caption]
Stretched in a longitudinal
direction due to the
anamorphic lens.
2.39:1 Aspect display
21
Adjustment Using the Menus

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lmd-a220Lmd-a180

Table of Contents