California Energy Commission Battery Charging Testing Instructions - VTech CS6114-2 User Manual

• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this
equipment not expressly approved by the
party responsible for compliance could
void the user's authority to operate the
equipment.
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation. Privacy of
communications may not be ensured when
using this telephone.
To ensure safety of users, the FCC has
established criteria for the amount of
radio frequency energy that can be safely
absorbed by a user or bystander according
to the intended usage of the product. This
product has been tested and found to
comply with the FCC criteria. The handset
may be safely held against the ear of the
user. The telephone base shall be installed
and used such that parts of the user's body
other than the hands are maintained at a
distance of approximately 20 cm (8 inches)
or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B).
FCC Part 68 and ACTA
This equipment complies with Part 68
of the FCC rules and with technical
requirements adopted by the
Administrative Council for Terminal
Attachments (ACTA). The label on the back
or bottom of this equipment contains,
among other things, a product identifier
in the format US:AAAEQ##TXXXX. This
identifier must be provided to your
telephone service provider upon request.
The plug and jack used to connect this
equipment to premises wiring and the
telephone network must comply with
applicable Part 68 rules and technical
requirements adopted by ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. An
RJ11 jack should normally be used for
connecting to a single line and an RJ14
jack for two lines. See the installation
instructions in the user's manual.
The Ringer Equivalence Number (REN) is
used to determine how many devices you
may connect to your telephone line and
still have them ring when you are called.
The REN for this product is encoded as the
6th and 7th characters following the US: in
the product identifier (e.g., if ## is 03, the
REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less.
For more information, please contact your
telephone service provider.
This equipment may not be used with
Party Lines. If you have specially wired
alarm dialing equipment connected to
your telephone line, ensure the connection
of this equipment does not disable your
alarm equipment. If you have questions
about what will disable alarm equipment,
consult your telephone service provider or
a qualified installer.
22
If this equipment is malfunctioning, it must
be unplugged from the modular jack
until the problem has been corrected.
Replacement to this telephone equipment
can only be made by the manufacturer
or its authorized agents. For replacement
procedures, follow the instructions
outlined under the Limited warranty.
If this equipment is causing harm to the
telephone network, the telephone service
provider may temporarily discontinue
your telephone service. The telephone
service provider is required to notify you
before interrupting service. If advance
notice is not practical, you will be notified
as soon as possible. You will be given
the opportunity to correct the problem
and the telephone service provider is
required to inform you of your right to file
a complaint with the FCC. Your telephone
service provider may make changes in
its facilities, equipment, operation, or
procedures that could affect the proper
functioning of this product. The telephone
service provider is required to notify you if
such changes are planned.
If this product is equipped with a corded
or cordless handset, it is hearing aid
compatible.
If this product has memory dialing
locations, you may choose to store
emergency telephone numbers (e.g.,
police, fire, medical) in these locations. If
you do store or test emergency numbers,
please:
Remain on the line and briefly explain the
reason for the call before hanging up.
Perform such activities in off-peak hours,
such as early morning or late evening.
Industry Canada
This device contains licence-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada's licence-exempt
RSS(s).
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this telephone.
The term ''IC:'' before the certification/
registration number only signifies that the
Industry Canada technical specifications
were met.
The Ringer Equivalence Number (REN) for
this terminal equipment is 1.0. The REN
is an indication of the maximum number
of devices allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination
of devices subject only to the requirement
that the sum of the RENs of all the devices
does not exceed five.
This product meets the applicable
Innovation, Science and Economic
Development Canada technical
specifications.
California Energy Commission
battery charging testing
instructions
This telephone is set up to comply with the
energy-conserving standards right out of
the box. These instructions are intended for
California Energy Commission (CEC) compliance
testing only. When the CEC battery charging
testing mode is activated, all telephone
functions, except battery charging, will be
disabled.
To activate the CEC battery charging testing
mode:
1. Unplug the telephone base power
adapter from the power outlet. Make sure
23