NOTE
• If there is no number in the list, the
display shows EMPTY.
Delete a redial list entry
1. Press
to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
, and then press ▼/▲ to
3. Press
select DELETE.
4. Press
twice to confirm.
Delete all redial entries
1. Press
to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
, and then press ▼/▲ to
3. Press
select DELETE ALL.
4. Press
twice to confirm.
Find handset
This feature helps you find all system
handsets.
CAUTIONS
• Do not press and hold
than four seconds. It may lead to
handset deregistration.
• If the handset displays To register
HS... and ...see manual, refer to
Frequent asked questions to register
the handset back to the telephone
base.
To start paging
Press
on the telephone base.
• All idle handsets ring and display
PAGING.
NOTE
• Paging tone continues on the other
handset.
To end paging
• Press
again on the telephone
base;
• Press
,
or
• Place the handset in the handset
base / charger.
NOTE
• Paging tone stops when paging
stops.
23
for more
,
on the handset;