Technical Specifications; Switch Specifications - Cisco IE 4010 Hardware Installation Manual

Technical Specifications

This chapter contains the following sections:
•
•
•

Switch Specifications

Table 15: Cisco IE 4010 Switch Specifications
Environmental Ranges
Operating temperature
Note
Storage temperature
Relative humidity
Operating altitude
Storage altitude
Thermal spacing
Operational shock
Switch Specifications, on page 77
Power-Supply Module Specifications, on page 79
Alarm Ratings, on page 79
Operating
temperatures
exceeding 60°C are
not covered by the
product safety
certifications and
approvals.
However, the switch
can function in the
installations under
the environmental
conditions listed.
C H A P T E R
-40°C to +74°C
• -40°C to +75°C (Vented Enclosure Operating- 40 LFM Air Flow)
• -40°C to +60°C (Sealed Enclosure Operating- 0 LFM Air Flow)
• -34°C to +75°C (Fan or Blower equipped Enclosure Operating- 200
LFM Air Flow)
• -40°C to +85°C (IEC 60068-2-2 Environmental Type Tested to
+85°C for 16 hours)
Note The maximum operating temperature of the switch varies
depending on the type of SFP module that you use.
–40 to 185°F (–40 to 85°C)
5 to 95% (noncondensing)
Up to 13,800 ft (3049 m)
Up to 15,000 ft (4570 m)
1.75 in. (4.4 cm)
50G at 11ms, half sine and 200G ar 2.11ms, half sine.
Cisco IE 4010 Switch Hardware Installation Guide
8
77