Cisco IE 4010 Hardware Installation Manual page 84

Switch Specifications
Environmental Ranges
Non-Operational Shock
Physical Specifications
Weight
Dimensions (H x W x D)
Table 16: Cisco IE 4010 Switch Power Requirements
Nominal input voltage
Absolute maximum (short term) input voltage
Maximum PoE power available to Powered Devices
(PD), with one power supply module installed
Maximum PoE power available to Powered Devices
(PD), with two power supply modules installed
Table 17: Table 15 Cisco IE 4010 Switch Power Consumption
FRU Configuration
With 2 power supplies
(150W or 250W), PoE
not enabled.
Cisco IE 4010 Switch Hardware Installation Guide
78
65-80G at 9ms, Trapezoidal
Without power supply: IE-4010-4S24P; 12.1 lbs (5.46 kg,
IE-4010-16S12P: 12.7 lbs (5.78 kg)
• PWR-RGD-AC-DC-H:2.55 lb (1.16 kg)
• PWR-RGD-LOW-DC-H:2.5 lb (1.13 kg)
1.75 x 17.5 x 15.0 in. (4.45 x 44.5 x 38.1 cm)
Max Power at 60C
FRU Mode IE-4010-4S24P
Watts
Redundant 65
PWR-RGD-AC-DC-H:
100 to 240 VAC, 50 to 60 Hz
100 to 250 VDC
PWR-RGD-LOW-DC-H:
24 to 60 VDC
PWR-RGD-AC-DC-H:
85 to 265 VAC, 47 to 63 Hz
88 to 300 VDC
PWR-RGD-LOW-DC-H:
18 to 75 VDC
80W
200W
IE-4010-16S12P
BTU/hr Watts
222 70
Technical Specifications
BTU/hr
239