Technical Specifications; Environmental And Physical Specifications - Cisco C9200CX-8P-2X2G-A Hardware Installation Manual

Technical Specifications

•

Environmental and Physical Specifications

This table describes the environmental specifications.
Table 6: Environmental Specifications for the Switch
Environmental Ranges
Operating temperature
3
Storage temperature
Relative humidity
Operating altitude
Storage altitude
3
Table 7: Physical Specifications of the Switch
C9200CX-8P-2X2G
C9200CX-12P-2X2G
Environmental and Physical Specifications, on page 53
Minimum ambient temperature for cold start is 32°F (0°C)
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
A
A P P E N D I X
23 to 113°F (–5 to 45°C)
• Always measure the operating
Note
temperature within 1 inches from the
sides of the switch.
• Note that the maximum operating
temperature can be limited by the type
of SFP used. Refer to the Datasheet
for information about specific
restrictions.
–40 to 158°F (–40 to 70°C)
5 to 90% (non-condensing)
Up to 5000 ft (1500 m)
Up to 15,000 ft (4500 m)
1.73 x 10.6 x 9.6 in. (4.4 x 26.9 x 24.4 cm)
1.73 x 10.6 x 9.6 in. (4.4 x 26.9 x 24.4 cm)
53