Cable And Connectors; Connector Specifications; 10/100/1000 Ports; Sfp Module Connectors - Cisco IE 4010 Hardware Installation Manual

Cable and Connectors

This chapter contains the following sections:
•
•

Connector Specifications

This section contains the following:

10/100/1000 Ports

The 10/100/1000 Ethernet ports on the switches use RJ-45 connectors. The following figure shows the pinouts.
Figure 35: 10/100/1000 Port Pinouts
Connector pins 1, 2, 3, and 6 are used for PoE.

SFP Module Connectors

The following figure shows a LC style connector that is used with the SFP Module slots. It is a fiber-optic
cable connector.
Connector Specifications, on page 61
Cables and Adapters, on page 63
6
C H A P T E R
Cisco IE 4010 Switch Hardware Installation Guide
61