Power-Supply Module Specifications; Alarm Ratings - Cisco IE 4010 Hardware Installation Manual

Technical Specifications
FRU Configuration
With 1 power supply
(150W or 250W), PoE
not enabled.
With 2 150W power
supplies, PoE enabled
With 2 250W power
supplies, PoE enabled
With 2 power
supplies(150W and
250W), PoE enabled

Power-Supply Module Specifications

Table 18: Power Supply Module Physical Specifications
Weight
PWR-RGD-AC-DC-H
PWR-RGD-LOW-DC-H
Dimensions (H x W x D)
PWR-RGD-AC-DC-H and PWR-RGD-LOW-DC-H

Alarm Ratings

Table 19: Alarm Input and Output Ratings
Alarm input electrical specification
Alarm output electrical specification
Max Power at 60C
FRU Mode IE-4010-4S24P
Watts
-NA- 61
Load Shared 112
Load Shared 157
Load Shared 133
Cisco IE 4010 Switch Hardware Installation Guide
Power-Supply Module Specifications
IE-4010-16S12P
BTU/hr Watts
208 65
382 117
535 156
454 138
2.55 lb (1.15 kg)
2.5 lb (1.13 kg)
1.58 x 7 x 5 in. (4 x 17.8 x 12.7 cm) (without
mounting flanges)
1.58 x 8.15 x 5 in. (4 x 20.7 x 12.7 cm) (with
mounting flanges)
No external voltage needed to activate alarm inputs.
The open circuit voltage between any Alarm input (1
to 4) and Alarm input Common is 5VDC and the loop
current is 2 mA max per input.
30VDC @ 1A, 48VDC @ 0.5A
BTU/hr
222
399
532
471
79