Table of Contents
Advertisement
Daily use
18 | Sennheiser TVS 200 Earbuds
Daily use
Daily use – TVS 200 Earbuds
Reconnecting for daily use
Pairing as described in (> 13) is only required when the earbuds
are connected for the first time. They do not have to be paired
again.
1. Make sure that Bluetooth is activated on your smartphone – or
that the TV transmitter is switched on – before you take the ear-
buds out of the charging case.
2. When you take the earbuds out of the charging case, they are
usually automatically connected to the smartphone within 12 sec-
onds.
3. This is displayed on the smartphone status screen or in the Blue-
tooth menu (the exact details may depend on your smartphone
model).
• If you have activated Bluetooth after you have already taken
the earbuds out of the charging case, or if you are out of
range of your smartphone, you can briefly press the button
on the earbud to re-establish the connection.
• When the earbuds are paired with multiple devices, the ear-
buds first try to connect to the last connected device. If the
device is not found, the earbuds will try to connect to the
second to last connected device and so on. Since each con-
nection attempt can take up to 7 seconds, the connection
attempt in case of 6 paired devices can take up to 42 sec-
onds.
• Depending on your smartphone, it could be necessary to
establish the connection between the smartphone and the
earbuds manually. To do so, you have to either select "Senn-
heiser TVS 200" from the list of paired Bluetooth devices or
briefly press the multifunction button on the earbud.
• You can also stream from your smartphone if only one
earbud has been taken out of the charging case. The first
earbud taken out of the charging case is the primary earbud.
This is important because the primary earbud will pick up
your voice during a call.
• When you reinsert the primary earbud into the charging
case, the earbuds switch roles and the other earbud
becomes the primary earbud. This briefly interrupts your
streaming for about 5 seconds, as the remaining earbud has
to be reconnected to the smartphone.
Controlling the earbuds
The earbuds offer two ways to control the various functions.
The controls are only active when the earbuds are properly
inserted into the ears.
• Button control
Each earbud has a proper button with click feeling in the center
of the button surface.
The button of the right earbud "increases (up)" and the button of
Advertisement
Table of Contents
