Table of Contents
Advertisement
Connecting the earbuds to the TV transmitter
Refer to the "TV Clear Transmitter 2" instruction manual to con-
nect and operate the transmitter.
www.sennheiser-hearing.com/tvcleartransmitter2
When connecting the earbuds to the TV transmitter for the first time,
you have to set them to pairing mode as described in chapter "Set-
ting the earbuds to pairing mode"(> 13).
After pairing, the earbuds connect automatically when you take
them out of the charging case.
If the transmitter has been purchased as part of the "TVS 200" set,
the transmitter and earbuds have already been paired during pro-
duction. Simply open the lid of the charging case and continue with
the chapter "Daily use – TV transmitter"(> 29).
1
ON
LED
3
1. Make sure that the TV transmitter is properly connected to the TV
or audio source and switch it on (see the instruction manual of the
TV transmitter).
2. Press the pairing button on the rear of the TV transmitter.
The light indicator on the front of the TV transmitter flashes
briefly. Your transmitter is now connected to the earbuds and the
light indicators on the charging case stop flashing.
3. Insert the earbuds into your ears. After insertion, you hear a con-
firmation. The sound from your transmitter will be played through
the earbuds when they are connected.
Additional information on pairing
• The earbuds can be paired with up to 6 devices, including a max-
imum of 2 TV transmitters. If the earbuds are paired with a
seventh device, the least used device will be replaced.
• All three light indicators flash blue during the pairing process.
This process can take up to 8 minutes, but is usually completed
within a few seconds.
• The earbuds have to be paired only once with a smartphone,
tablet or the TV transmitter. The devices remain paired after they
are switched off and are automatically reconnected when they
are switched on, if they are within the range.
• To reconnect manually, go to the Bluetooth menu of your device
and select "Sennheiser TVS 200" from the list or briefly press one
of the buttons on the earbuds while wearing them.
Configuring the TVS 200 Earbuds
2
LED
Sennheiser TVS 200 Earbuds | 15
Advertisement
Table of Contents
