Connecting Test Equipment - Fujitsu F2MC-16L Hardware Manual

2.6

Connecting Test Equipment

Connect test equipment to the emulator, as shown in Figure 2.6-1 "Connecting test
equipment", only if the external trigger input and program execution functions of the
emulator are to be used. If these functions are not used, do not connect the TRIG and
EMUL terminals.
I Connecting test equipment
CAUTION
Prohibition
BNC cable
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables.
Doing so may result in device problems or electric shock.
Do not grasp the cable when unplugging the power plug and cable.
Always grasp the power plug or connector itself. Pulling the cable may
expose conductors or sever wires in it, possibly resulting in device
problems, fire, or electric shock.
Figure 2.6-1 Connecting test equipment
Get other manuals https://www.bkmanuals.com
2.6 Connecting Test Equipment
31