Connecting The Emulation System; Cabling The Emulator Mb2198-01 - Fujitsu MB91460 Getting Started

4.3 Connecting the Emulation System

The following connections have to be established:

4.3.1 Cabling the Emulator MB2198-01

There are some connections necessary for the emulator MB2198-01. The following lists
each step.
1. Connect the emulator MB2198-01 (1) e.g. with the USB-Cable (2) to the USB port of
the PC. (Analogously for other connection types. Please also refer to chapter 7)
2. Plug the DSU-FR Cable MB2198-10 (3) into the port labelled 'DSU Cable' (4). The
correct position of cable and port is marked with arrows.
3. Finally, connect the 16 V DC power supply (5) to the port 'DC in' (6) and to 230 V.
Please, be aware, that the emulator is switched off.
Figure 2 illustrates the necessary connections of the emulator MB2198-01.
MCU-AN-391005-E-V17
Getting Started
Chapter 4 Installation of the Emulation System
Figure 2: Connections of the Emulator MB2198-01
- 10 - © Fujitsu Microelectronics Europe GmbH