Connecting A Host Machine - Fujitsu F2MC-16L Hardware Manual

CHAPTER 2 CONNECTING THE EMULATOR
2.5

Connecting a Host Machine

Connect a host machine to the emulator by using an RS-232C, USB, or LAN cable, as
shown in Figure 2.5-1 "Connecting a host machine".
For a Plug & Play connection with a USB cable to a host machine, power on all
relevant equipment, and then insert the USB cable plug for the host machine into the
appropriate host machine socket.
I Connecting a host machine
CAUTION
Prohibition
Note:
Connect only one RS-232C, USB, or LAN cable between a host machine and the emulator.
Connecting multiple communication cables between them may result in abnormal operation.
30
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables
(unless such an operation uses USB cables for plug-and-play devices).
Doing so may result in device problems or electric shock.
Do not grasp the cable when unplugging the power plug and cable.
Always grasp the power plug or connector itself. Pulling the cable may
expose conductors or sever wires in it, possibly resulting in device
problems, fire, or electric shock.
Figure 2.5-1 Connecting a host machine
USB cable
RS-232C cable
Get other manuals https://www.bkmanuals.com
LAN cable