Rs-232C Port Specifications - Fujitsu F2MC-16L Hardware Manual

CHAPTER 1 PRODUCT HANDLING AND SPECIFICATIONS
1.4

RS-232C Port Specifications

The emulator includes an RS-232C port.
I RS-232C port specifications
Table 1.4-1 "RS-232C port specifications" lists the RS-232C port specifications, and Figure 1.4-
1 "Pin assignment of the RS-232C connector" shows the pin assignment of the RS-232C
connector.
For information on Interlink cable connection, see Section 1.10 "Options".
Table 1.4-1 RS-232C port specifications
Item
Connector shape
Signal definition
Baud rate
Data bit length
Start bit length
Stop bit length
Parity bit
X control
*1: Baud rates depend on the emulator debugger specifications.
For details, see the Softune Workbench Operation Manual.
To internal emulator circuit
6
D-sub 9 pins (male)
DTE (same as the signal definition for personal computers)
(*1)
9600, 19.2 K, 115.2 K [bps]
8 bits
1 bit
1 bit
None
None
Figure 1.4-1 Pin assignment of the RS-232C connector
CTS
RTS
GND
TXD
RXD
Note: The emulator uses pin assignments that do not use some
signal lines, as shown above.
Get other manuals https://www.bkmanuals.com
Description
RS-232C connector
8 (CTS)
7 (RTS)
6 (DSR)
5 (GND)
4 (DTR)
3 (TXD)
2 (RXD)
1 (DCD)