Appearance And Part Names - Fujitsu F2MC-16L Hardware Manual

1.2

Appearance and Part Names

This section gives the names of all parts of the emulator unit.
I Appearance and Part Names
Figure 1.2-1 "Top view of the emulator unit" to Figure 1.2-3 "Rear view of the emulator unit"
show the exterior of the emulator unit and give the names of all of its parts.
(1)
(2)
(3)
(4)
(5)
No. Name
(1) Status indicator LCD
(2) POWER LED
(3) UVCC LED
(4) Setting switches
(5) Adapter board connector
*1: For information on the type of information displayed on the status indicator LCD and how to use the setting
switches, 3.7
see Section
*2: If the evaluation MCU has a dual source power supply, this LED goes on when both power supplies are turned on.
Figure 1.2-1 Top view of the emulator unit
MB2147-01
2
F MC-16 SERIES EMULATOR
POWER
Displays different kinds of information, including setting values, communication status,
(*1)
and operating status.
Goes on when emulator power is supplied.
Goes on when user system power (UV
Used to change settings and the information displayed on the status indicator LCD.
Connects to an adapter board (option).
"Using the Setting Switches."
Get other manuals https://www.bkmanuals.com
1.2 Appearance and Part Names
UVCC
Description
(*2)
) is supplied.
CC
(*1)
3