Table of Contents
Advertisement
Set up, install, and configure
5
Insert the tray.
If necessary, set the paper size and type to match the paper loaded in the tray.
Note: When a finisher is installed, the images are rotated to 180° when printed.
Loading the 2000-sheet tray
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Pull out the tray, and then open the tray side door.
Note: To avoid jams, do not pull out trays while the printer is busy.
62
Advertisement
Table of Contents
