E-Mail; Using The Automatic Document Feeder And Scanner Glass; Sending An E-Mail; Creating An E-Mail Shortcut - Lexmark MX931 MFP User Manual

E-mail

E-mail

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

Sending an e-mail

Before you begin, make sure that the SMTP settings are configured. For more information, see
the e‑mail SMTP settings" on page
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch E-mail, and then enter the needed information.
3
If necessary, configure the scan settings.
4
Send the e-mail.

Creating an e-mail shortcut

1
From the home screen, touch E‑mail.
2
Configure the settings, and then touch
3
Create a shortcut.
Scanner glass
47.
.
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
167
"Configuring