Lexmark MX931 MFP User Manual page 335

Troubleshoot a problem
Error codes
83.30
84.01
84.11
84.21
84.31
86.23
86.33
87.20
87.30
200.03, 240.06
200.16[x], 241.16a
200.26[x], 200.36[x], 200.46[x], 200.56a,
202.95[x], 242.26, 242.33, 242.43,
243.33, 243.36, 243,43, 244,43, 244,46
200.56a, 245.53[x], 245,56
200.95, 201.96, 202.93, 202.94, 221.93,
221.95, 232.93, 240.25, 240.35, 240.55
Error message
Staples empty or misfed.
Imaging unit nearly low.
Imaging unit low.
Imaging unit very low.
Replace imaging unit,
recommended life
exceeded.
Scanner maintenance
required soon.
Replace ADF kit,
recommended life
exceeded.
Hole punch box nearly
full.
Empty the hole punch box.
Paper jam [jam header].
Paper jam [jam header].
Paper jam [jam header].
Paper jam [jam header].
Paper jam [jam header].
Solution
Try either of the following:
•
Remove, and then insert the
staple cartridge.
•
Replace the staple cartridge. For
more information, see
"Replacing the staple cartridge"
on page 300.
Touch Continue to clear the
message.
See "Replacing the imaging unit" on
page 267.
Touch Continue to clear the
message.
See "Replacing the ADF roller kit"
on page 284.
Touch Continue to clear the
message.
1
Open the paper transport cover
F.
2
Remove the hole punch box,
and then empty it.
3
Insert the hole punch box.
4
Close the cover.
See "Paper jam in the multipurpose
feeder" on page 372.
See "Paper jam in the standard tray"
on page 367.
See "Paper jam in the optional trays"
on page 368.
See "Paper jam in the 2000‑sheet
tray" on page 372.
See "Paper jam in door A" on
page 373.
335