Product Safety Labels - Barco G62-W9 User Manual

• If the product does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of the other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
• If the product has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
Safety Data Sheets for Hazardous Chemicals
For safe handling information on chemical products, consult the Safety Data Sheet (SDS). SDSs are available
upon request via safetydatasheets@barco.com.

1.3 Product Safety Labels

Light beam related safety labels
For G62-W9
Label image
For G62-W11 & G62-W14
Label image
Label description
Risk Group 2, IEC60825-1:2014.
Do not look into the laser light. The extremely high brightness may
cause permanent eye damage.
IEC 60825-1:2014 CLASS 1 LASER PRODUCT RISK GROUP 2
Complies with 21 CFR 1040.10 and 1040.11 except fro conformance
as a Risk Group 2 LIP as defined in IEC 62471–5:Ed.1.0. For more
information see Laser Notice No. 57, dated May 8, 2019.
Warning: mount above the heads of children
Additonal warning against eye exposure for close exposures less
than 1 m.
Label description
FDA laser variance (US projectors only).
This product is in conformity with performance standards fro laser
products under 21 CFR 1040, except with respect to those
characteristics aurhorized by Variance Number xxxx-x-xxxx effective
on [effective date of variance approval].
For the exact Variance Number and effective date see yellow label
on the projector.
IEC 60825-1:2014 CLASS 1 LASER PRODUCT RISK GROUP 2
Complies with 21 CFR 1040.10 and 1040.11 except fro conformance
as a Risk Group 2 LIP as defined in IEC 62471–5:Ed.1.0. For more
information see Laser Notice No. 57, dated May 8, 2019.
Safety
R5914653 /05 G62 15