Daikin FTXP20-71L Service Manual page 128

3 | Components
To install the swing raster motor
Service manual
128
a
c
a Swing raster shaft
b Swing raster motor rod
c Swing raster motor assembly
5 Remove the swing raster motor assembly from the indoor unit.
6 Remove the 2 screws that fix the swing raster motor to the bracket.
7 Disconnect the rod from the swing raster motor and remove the motor. Keep
the rod and bracket for reuse.
8 To install the swing raster motor, see
1 Install the swing raster motor on the bracket using the 2 screws. Do NOT yet
tighten the screws.
2 Install the rod on swing raster motor shaft.
3 Bring the swing raster motor assembly to the correct position in the indoor
unit and guide the swing raster shaft in the swing raster motor assembly.
a
c
a Swing raster shaft
b Swing raster motor rod
c Swing raster motor assembly
b
"3.12.2 Repair
b
4
procedures" [ 127].
ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
Split Comfora R32
ESIE18-01E – 2023.01