Daikin FTXP20-71L Service Manual page 118

3 | Components
To close the front panel
To remove the front panel
To remove the front grille
Service manual
118
1 Set the filters as they were.
2 Gently press the front panel at both sides and at the center until it clicks.
1 Open the front panel, see
2 Remove the front panel by sliding it to the left or the right and pulling it
toward you.
Result: The front panel shaft on 1 side will be disconnected.
3 Disconnect the front panel shaft on the other side in the same manner.
a
a Front panel shaft
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,...)
when installing, maintaining or servicing the system.
1 Remove the front panel to remove the air filter.
2 Remove 2 screws (class 20~35) or 3 screws (class 50~71) from the front grille.
3 Push down the 3 upper hooks marked with a symbol with 3 circles.
4
"3.9 Plate work" [ 111].
ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
Split Comfora R32
ESIE18-01E – 2023.01