Heat & Glo 6000CL-IFTLP-S Installation Manual page 56

Finishing Material Thickness:
1-6 Inches Maximum
NOTICE: Remove finishing strips before firing appliance.
FINISHING
MATERIAL
DECORATIVE FRONT
(Outside decorative front width)
(Includes 1/8 in. opening each side of decorative front)
Figure 10.7 Finishing Material Thickness Greater Than One Inch
56
FINISHING
STRIPS USED
NON-COMBUSTIBLE
FINISHING MATERIAL
FINISHING
MATERIAL
A
C
Heat & Glo • 6000CL-IFT, 8000CL-IFT Installation Manual • 2504-980 Rev. Q • 11/21
(Outside decorative front width)
(Includes 1/8 in. opening each side of decorative front)
Finishing material thickness, 1-6 inches maximum
B = Top of decorative front to bottom of fireplace.
D = Bottom of Finishing Material to Bottom of Fireplace
8000 Models
Inches Millimeters
44-1/16 1119
A
35-15/16 913
B
44-5/16 1126
C
36-5/16 922
D
B
A
C
6000 Models
Inches Millimeters
37-1/16 941
34-1/16 865
37-5/16 948
34-7/16 875
D