Customised Setting Options - Bosch MUC8 Series Instruction Manual

en Customised setting options

Customised setting options

The pre-configured values for the prepara-
tion time and the preparation temperature
or steam pressure can be adapted to indi-
vidual needs and the recipe guidelines.
Setting the preparation time
1. In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for this preparation
programme is shown.
2. Press button F once.
The pre-configured preparation time flashes
in the display.
3. Keep pressing button F until the desired
preparation time is displayed.
When button F is briefly pressed, the
preparation time is increased by 1 minute.
The time increases up to the pre-configured
maximum value and then returns to the
pre-configured minimum value. When
button F is pressed for a longer period,
the preparation time is increased by
10 minutes.
4. Once the desired preparation time is
displayed, press button G.
The preparation programme with the set
preparation time is started.
If the time needs to be adjusted individually
for all preparation steps in a selected
programme, then repeat points 2 to 4 prior
to starting the respective preparation step.
Note: These settings are not saved. If this
preparation programme is selected again,
the pre-configured preparation time will be
shown in the display once more.
Setting the preparation
temperature
For preparation programmes without the
steam pressure function, the temperature
can be selected individually.
1. In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
20
MUC6_MUC8_EU2_8001036705.indb 20
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for this preparation
programme is shown.
2. Press button C once.
The pre-configured preparation temperature
flashes in the display.
3. Keep pressing button C until the desired
preparation temperature is displayed.
When button C is briefly pressed, the
preparation temperature is increased by
5°C. The temperature increases up to the
pre-configured maximum value and then
returns to the pre-configured minimum
value. When button C is pressed for a
slightly longer period, the temperature is
increased by 10°C.
4. Once the desired preparation
temperature is displayed, press
button G.
The preparation programme with the set
preparation temperature is started.
If the temperature needs to be adjusted
individually for all preparation steps in a
selected programme, then repeat points
2 to 4 prior to starting the respective
preparation step.
Note: These settings are not saved. If this
preparation programme is selected again,
the pre-configured preparation time will be
shown in the display once more.
Setting the steam pressure
For preparation programmes with pre-set
steam pressure function, the temperature
can be selected via "low steam pressure"
[ K ] or "high steam pressure" [ L ].
1. In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for this preparation
programme is shown. The indicator
"low steam pressure" [ K ] or "high steam
pressure" [ L ] additionally lights up.
15.03.2016 14:46:22