DLP LightCrafter DLPC910 EVM (DLPLCRC910EVM) Overview
3.6 DLP LightCrafter DLPC910 LEDs
DLP LightCrafter DLPC910 EVM LEDs (Top View - Upper Left)
View - Lower Left)
depicts the LEDs with their respective locations:
D6
D5 D4
Figure 3-4. DLP LightCrafter DLPC910 EVM LEDs
(Top View - Upper Left)
Connector
EVM Function
Reference
D1
Heartbeat LED [Flashing]
D2
Calibration Active
D3
DLPC910 Done
D4
12 V Power
D6
Power Good
D7
ECP2 Finished
D5 is a protection Zener diode for the +12 VDC input and is not an LED.
12
DLP® LightCrafter™ DLPC910 Evaluation Module (EVM)
D3
D2
D1
Table 3-2. DLP LightCrafter DLPC910 EVM LED Reference
Flashes when DLPC910 controller is running
Illuminates while calibration is active
DLPC910 Initialization complete
+12 VDC is present on the input connector
All voltages are present and stable
DLPC910 configuration via SPI Flash complete
Copyright © 2023 Texas Instruments Incorporated
and
DLP LightCrafter DLPC910 EVM LEDs (Top
Figure 3-5. DLP LightCrafter DLPC910 EVM LEDs
(Top View - Lower Left)
Description or Use
Note
www.ti.com
D7
DLPU124 – JUNE 2023
Submit Document Feedback