Texas Instruments DLP LightCrafter DLPC910 User Manual page 65

www.ti.com
10. Programming is immediate and reports Programming succeeded in the lower left corner of the USB Control
Center window.
11. Power down the DLPLCRC910EVM board.
12. Reconnect the DLPLCRC910EVM to the VC-707 board and restart the system.
13. Start the DLPC910 GUI.
14. Select Help/About from the GUI menu to verify the USB firmware version.
DLPU124 – JUNE 2023
Submit Document Feedback
Copyright © 2023 Texas Instruments Incorporated
Operating the DLPLCRC910EVM
DLP® LightCrafter™ DLPC910 Evaluation Module (EVM) 65