Operation - MULTIQUIP V305EK Operation Manual

This section is intended to assist the operator with the initial
startup of the unit. It is extremely important that this section be
read carefully before using the roller in the field. DO NOT use
your roller until this section is thoroughly understood.
WARNING
Failure to understand the operation of the roller could
result in severe damage to the unit or personal injury.
CAUTION
NEVER operate the roller in a confined
area or enclosed area structure that does
not provide ample free flow of air.
1. ALWAYS make sure that the emergency stop button
(Figure 18) is pulled all the way out (disengage).
EMERGENCY
STOP BUTTON
TO DISENGAGE
Figure 18. Emergency Stop Button
2. Move the fuel valve lever (Figure 19) to the ON
position.
OFF
Figure 19. Fuel Valve Lever
V305EK VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (07/20/23) — PAGE 23
VIBRATION
CLOSE
CERRADO STOP
PARO
VIBRACION
SPRINKLER
ROCIADOR
OPEN
ABIERTO
VIBRATION
VIBRACION
PUSH
TO
RELEASE
EMPUJE
PARA
LIBERAR
MULTIQUIP COMPANY, 18910 WILMINGTON AVENUE
310-537-3700, 800/421-1244 NATIONWIDE, FAX: 310-537-3927 CARSON, CALIFORNIA 90746
FORWARD REVERSE
AVANCE REVERSA
N
PULL OUT
FUEL VALVE
LEVER
ON
3. To start a cold engine, move the choke lever (Figure 20)
to the CLOSED position.
CHOKE LEVER
CLOSE
Figure 20. Choke Lever
NOTICE
The CLOSED position of the choke lever enriches the
fuel mixture for starting a COLD engine. The OPEN
position provides the correct fuel mixture for normal
operation after starting and for restarting a warm
engine.
4. Move the throttle lever (Figure 21) away from the slow
position, about 1/3 of the way toward the fast position.
FAST
Figure 21. Throttle Lever (FAST)

OPERATION

OPEN
THROTTLE
LEVER
SLOW