Table of Contents
Advertisement
Figure 68
1. Jumper hoses
7.
Keep all bystanders away from the machines.
8.
Start the second machine and move the lift lever
to the R
position, which raises the disabled
AISE
cargo bed.
9.
Move the hydraulic-lift lever to the N
position, and engage the lift-lever lock.
10.
Install the bed support onto the extended lift
cylinder; refer to
32).
Note:
With both machines turned off, move the
lift lever back and forth to remove the system
pressure and ease the disconnection of the
quick couplers.
11.
After completing the operation, remove the
jumper hoses and connect the hydraulic hoses
to both machines.
Important:
Check the hydraulic-fluid levels
in both machines before resuming operation.
EUTRAL
Using the Bed Support (page
Cleaning
Washing the Machine
Service Interval: Before each use or daily—Wash
Wash the machine as needed using water alone
or with a mild detergent. You may use a rag when
g019543
washing the machine.
Important:
Do not use brackish or reclaimed
water to clean the machine.
Important:
Do not use power-washing equipment
to wash the machine. Power-washing equipment
may damage the electrical system, loosen
important decals, or wash away necessary grease
at friction points. Avoid excessive use of water
near the control panel, engine, and battery.
Important:
Do not wash the machine with the
engine running. Washing the machine with the
engine running may result in internal engine
damage.
56
the machine.
Advertisement
Table of Contents
