System Reset - Electro-Voice RE3-BPOL User Manual

38 en | RE3-RX receiver
2.
3.
4.
5.
6.
7.
8.
7.3.16

System reset

Resetting the receiver in menu item b, Reset restores all settings to factory default. Be very
sure you want to do this as all custom settings will be erased.
1.
02-2023 | 05 | F.01U.362.808
Select by pressing SET to enter the Display Options screen where the screen shows the
current settings.
M
7. RX Output Level
E
8. Antenna Power
N
9. Keylock
U
a. Display Option
Contrast setting is highlighted. To make any changes, press ▲ button to assign higher
contrast value, or press ▼ button to assign lower contrast value.
Display Options
Contrast: 4
Brightness: 4
Press set to move to brightness.
Current brightness value is highlighted. To make changes, press the ▲ button to assign
higher brightness value, or press the ▼ to assign lower brightness value.
Display Options
Contrast: 4
Brightness: 4
Press SET to save changes.
The display then returns to the main menu.
M
7. RX Output Level
E
8. Antenna Power
N
9. Keylock
U
a. Display Option
Press SET to save.
The display returns to the main menu.
M
7. RX Output Level
E
8. Antenna Power
N
9. Keylock
U
a. Display Option
Either scroll ▼ to EXIT and press SET, or briefly press SYNC on the receiver front panel to
return to the home screen. The contrast and brightness changes will impact the
appearance of all screens.
M
9. Keylock
E
a. Display Option
N
b. Reset
U
c. Exit
Press the ▼ button to scroll down to Reset from the main menu.
User Manual
RE3 UHF Wireless
Electro-Voice