Scanning Current Group - Electro-Voice RE3-BPOL User Manual

28 en | RE3-RX receiver
7.
7.3.5

Scanning current group

The current assigned group or a particular selected group can be scanned individually. This
process will locate clear channels within that group individually.
1.
2.
3.
4.
5.
02-2023 | 05 | F.01U.362.808
Either scroll ▼ to Exit and press SET, or press SYNC on the receiver front panel to return
to the home screen. The selected Group/Channel and associated Frequency displays on
the home screen.
M
9. Keylock
E
a. Display Option
N
b. Reset
U
c. Exit
Enter the main menu and select Scan by pressing SET.
M
1. Scan
E
2. Frequency
N
3. Group/Channel
U
4. Squelch
Press the ▼ button to scroll down to Current Group. Press SET to enter Result List.
M
1. All Groups
E
2. Result List
N
3. Current Group
U
4. Return
The current assign group is displayed. Prepare to scan that group, or scroll through other
groups using ▼ or ▲. Select the group to scan by press SET. The scan of that group
begins. When the scan is complete, the highlight box advances to channel, and the first
clear channel in that group appears.
Scan Current Group
CH: 1
G: 1
Push SET to Start.
Either press SET to save the channel displayed and exit, or press ▼ or ▲ to scroll through
to locate the next open channel. A brief scan occurs while locating the next clear channel.
Some channel numbers may be skipped because they were not clear at the time of the
scan. Press SET to save. This selects that group and channel the set will operate on.
Scan Current Group
12
5 CH:
G:
Push SET to Save.
This return to Current Group on the scan menu.
M
1. All Groups
E
2. Result List
N
3. Current Group
U
4. Return
User Manual
RE3 UHF Wireless
Electro-Voice