Table of Contents
Advertisement
62
en | Technical data
12
Technical data
RE3-RX receiver
Frequency oscillation mode:
Carrier frequency range:
Band names
Tuning bandwidths and carrier frequency
ranges
Sync frequency:
Diversity:
Bandwidth:
Signal/Noise ratio:
Total harmonic distortion:
Receiving sensitivity:
Frequency response:
Antenna type:
Antenna booster power:
Function display by:
Contents of display:
Control functions:
Sync data options:
02-2023 | 05 | F.01U.362.808
Phase-locked loop (PLL)
470 - 865 MHz
(tuning bandwidth is band dependent)
5L: 36 MHz (488 - 524 MHz)
5H: 36 MHz (560 - 596 MHz)
6M: 10 MHz (653 - 663 MHz)
T: 3 MHz (803 - 806 MHz)
8M: (823 - 865 MHz)
8M is split into two segments:
9 MHz (823 - 832 MHz)
2 MHz (863 - 865 MHz)
Ultrasonic 40 kHz
Antenna diversity
36 MHz
>100 dB(A)
<0.6 % at 1 kHz
-81 dBm for -12 dB SINAD
63 Hz~16 kHz±2 dB (BPT)
51 Hz~16 kHz±2 dB (HHT)
Detachable ½ wave with BNC connector
DC12 - 15 V/100 mA
LCD
Group, channel, frequency, antenna A/B,
transmitter battery level, transmitter status
(mute, live, or no sync), output level
attenuation, AF indication, RF indication, key
lock indicator.
Power, scan, frequency, group, channel,
squelch, TX sensitivity, TX attenuation, TX RF
power, TX auto off, TX key lock, TX display
info, TX sync configuration, RX output
volume, RX output level, RX antenna booster
power, RX key lock, RX display contrast, RX
display brightness, RX system reset.
Frequency, group, channel, sensitivity level,
attenuation status, RF power, auto off status,
key lock status, transmitter display (freq or
Gp/Ch).
User Manual
RE3 UHF Wireless
Electro-Voice
Advertisement
Table of Contents
