Opening The Burner; Closing The Burner - Riello RLS 300/EV FGR Installation, Use And Maintenance Instructions

6.3

Opening the burner

Disconnect the electrical supply from the
burner.
DANGER
 Remove the tie rod 1)(Fig. 53) of the head movement lever,
loosening nut 2).
 Disconnect the gas servomotor test point 3).
 Disconnect the gas pressure switch test point 4).
 Remove screws 5).
At this point it is possible to open the burner at the hinge.
6.4

Closing the burner

 Close the burner at the hinge.
 Apply screw 5)(Fig. 53).
 Connect the gas pressure switch test point 4)..
 Connect the gas servomotor test point 3).
 Apply the tire rod 1) of the head movement lever, loosening
nut 2).
 Connect the electrical supply from the burner.
Maintenance
D3818
51 GB
5
5 3 4
5 1
2
5
Fig. 53
20102963