Dubbing And Editing - Sanyo VHR-M341 Instruction Manual

DUBBING AND EDITING

If you wish to edit or dub your camcorder (or another VCR) recordings to this VCR, the rear
panel mounted Audio and Video (A/V) input jacks make the connections quick and easy. The
direct A/V jacks will also provide better picture results than using the RF jack on the rear
panel.
Another VCR: Play
From
AUDIO and
VIDEO Output
1
Connect the camcorder's (or another VCR's) A/V outputs to your VCR as illustrated above.
2
Set the input channel "LINE". (Press INPUT to select LINE.)
3
Play the tape in the camcorder (or another VCR). If you have a TV attached to your VCR,
you can see the video playing.
4
When you desire recording to begin, press VCR's REC once to start.
NOTE
Before recording, please confirm the recording start position.
30
Camcorder:
Play
From
AUDIO and
VIDEO Output
OR
Your VCR: Recording
AUDIO
IN OUT
3
VIDEO
CH.
To AUDIO/VIDEO Input
ANT.IN
VHF/UHF
/CATV
4