Table of Contents
Advertisement
INSTALLATION
Placing your VCR on the top of or under the TV receiver may result in interference appearing on
the TV screen when the VCR is on. If this occurs, move the VCR to a position alongside the TV
receiver.
VCR TO TV CONNECTION
When using the RF coaxial cable (Supplied)
Connect the 75-ohm Coaxial Cable to VHF/UHF/CATV
on the VCR. Connect the other end to the 75-ohm
antenna input on back of the TV.
AUDIO/VIDEO Cable (Not supplied)
AUDIO
OUT
IN
VIDEO
VCR's Back Panel
When using the Audio/Video cable (Not supplied)
If your TV has A/V input jacks, you may connect your VCR's AUDIO/VIDEO jacks on back of
your TV.
Direct audio/video connections usually result in a better picture and sound quality for tape
playback. Please see your TV's owner's manual for details. Then set your TV to the VIDEO
mode using the TV/VIDEO button on your TV.
6
To AUDIO/VIDEO IN
From AUDIO/VIDEO OUT
ANT.IN
VHF/UHF
/CATV
75 ohm Coaxial Cable (Supplied)
3
4
To VHF/UHF/CATV
CH.
TV set
R-AUDIO-L
VIDEO
OUT
OUT
Cable/
IN
IN
Antenna
Advertisement
Table of Contents
